Manufactuing Process
01
Refining of mud
Different ceramic raw materials are mixed, stirred through mechanical equipments with a certain proportion water to make the mud needed for producting kamados.
02
Ceramic kamado bodies formed by hands or machines
The workers with many years of production experience,use manual or mechanical methods to complete the forming of kamado bodies through our precise molds.
03
Ceramic kamado bodies trimmed
The ceramic kamado bodies formed through the molds needs to be carefully inspected and trimmed by professional workers.
04
Ceramic kamado bodies fired in the auto controlled kiln
Our kiln is an auto controled natural-gas kiln with precise temperature and small temperature difference, so it ensures the high quality and high qualification rate of protucts.
05
Preparation of kamado ceramic bodies before glazing
Before glazing, kamado ceramic bodies need to be inspected and trimmed to ensure the quality.
06
Ceramic kamado bodies glazed
The glaziers spray different colors of glaze water evenly on the ceramic kamado bodies with special tools.
07
Glazed kamado bodies fired in the kiln
They were puted into the auto controlled kiln once again, and after firing, the bright and colorful kamado bodies were born.
08
Quality inspection before assemblying
Carefully check the ceramic parts and glaze parts of each ceramic kamado body, timely replace the defective ceramic kamado bodies, and ensure the perfect kamado will be delivered to the customers.
09
Assembling kamado
The workers with rich installation experience carefully assemble kamado according to the order requirements of customers.
10
Quality checking and packing
The quality inspection shall be carried out again before packing kamado to ensure that there are no mistakes. Finally, our kamado will be delivered to the customers on time with good quality.
Address :
No. 88 Jiannan Road, Luojian Industrial Zone, Dingshu Town, Yixing City, Jiangsu Province
E-mail :
lei@xpykamado.com
tina@xpykamado.com
Phone :
+86-13812201812 (Tina Zhang)
FEEDBACK